1 Roll/357 €
3 Rolls/808 €
5 Rolls/1095 €
Please contact us for quotes on larger quantities !!!
Aluminum Laminated Film for Pouch Cell Case
Thickness: 113 μm, Width: 400 mm, Length: 10 m.
Technical Properties:
| Layers from outside (Shiny) to inside (Mat)
|
Polyamide (JIS Z1714): 0.025mm (+-0.0025mm)
Adhesive (Polyester-polyurethane): 4-5 g/m2
Aluminum foil (JIS A8079,A8021): 0.040mm (+-0.004mm)
Adhesive (Urethane-free Adhesive): 2-3 g/m2
Polypropylene: 0.040mm (+-0.004mm) |
| Thickness |
113 μm |
| Width |
400 mm |
| Length |
10 m |
| Surface quality |
Mat finish |
| Pinholes |
Subject to the applicable aluminum foil standard |
| Impurity |
1 mm or less in diameter |
| Fish Eye |
2 mm or less in diameter (clear),1 mm or less in diameter (colored) |
| Molding Depth |
≥5.0 mm |
| Electrical Insulating |
Good |
| Hot Sealing Conditon |
180-190°C |
| Moisture Vapor / O2 Transmission Rate |
200 ppm / 5 years |
| Laminate Strength |
Nylon/Al more than 2N/15mm Al/CPP more than 5N/15mm |
| Heat Seal Strength |
More than 22.5N/15mm wide at 200℃ x 0.2Mpa x2 sec by TOB heat sealing |
| Solvent Retention |
Less than 5mg/m2 |
| Appearance |
Within the sample of the limit |
| Slip Factor |
CPP/CPP less than 1.0 |